Fits the following:

• Most inboard engines

• All Japanese outboards

• Most inboard engine stern legs

• Anything with 33C morse cables.

Features:

• Can be left or right side mounting.

• Unscrew lever and move 45-degree stages around the control unit so you can have the lever in any position you require

• Engine control Single lever dual action You can use both throttle and gear with this one lever.

• Pull the lever out and you have fast idle only in neutral.

• All fittings and mounting screws supplied.

• Black paint (PLEASE NOTE PAINT ON CONTROL BOX MAY HAVE A FEW MINOR CHIPS OR SURFACE IMPERFECTIONS.)

Dimensions/Measurements for the controller's head:

• Base - 155mm at widest point 105mm at the narrow point

• Length 240mm

• Stands out 60mm

• With lever straight-up position (as in photo) 340mm

• Top of the lever to bottom of the unit. Lever

• Length from the centre of shaft 170mm so any position you have lever it will be 170mm from centre of the shaft.

Standard Morse 33c cables

Check out our control cables for these.

One year TGH Marine return to base warranty.

PICKUPS ARE AVAILABLE FROM HUNUA WITH ARRANGEMENT - THIS IS AN OPTION IN THE FREIGHT PAGE